Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Lobaro wMBUS NB-IoT Gateway

Power Supply

  • 3.6V JST XH Connector (3.4V - 5V)
  • Compatible to ER34615 Battery from Lobaro

Environment

  • Temperature: -20°C - +55°C

Radio

V2

Product Technical characteristics
Type nameLOB-GW-WMBUS-NB-2
DescriptionLobaro Wireless M-Bus NB-IoT Gateway V2 
Cellular NB-IoT / LTE Cat.
M
  • wMBUS recevier C1/T1 & S1 Modes (868 MHz), OMS v3 & v4
  • Internal 868 MHz wMBUS Antenna
  • Internal 791 MHz ... 960 MHz NB-IoT/LTE Cat. M Antenna (E-UTRA Bands: 5, 8, 20)
  • M1 Modem
    LTE ChipsetNordic nRF9160
    Antenna
    • Internal Monopole
    • On Request: External Antenna (SMA female)
    Supported LTE Band
    • B8, B20 (791 MHz - 969 MHz)
    • Other Bands on request
    SIM card slot4FF (Nano SIM)
    Supported LTE modes
    • Narrowband IoT (NB-IoT)
    • LTE Cat-M1 
    Data Upload
    • CoAP over DTLS (supported by Lobaro IoT Platform)
    • Plain UDP
    Wireless M-Bus communication
    Antenna
    • Internal Monopole
    • On Request: External Antenna (SMA female)
    Frequencies868.3 MHz, 868.95 MHz
    Supported wireless M-Bus modes
    • C1
    • T1 
    • S1

    unidirectional 868 MHz band modes according to EN13757-4 

    Telegram storage size250 telegrams á 255 Byte (64 KByte)
    Maximum white list sizeminimum 150 different meters (2 KByte config size)
    White list filters
    • Meter ID
    • Manufacturer code (M-Field)
    • Meter type (e.g. only water meters) 
    Supported meters per gateway
    • Standard: 250
    • On request: up to 1.000
    EncryptionAES128 (Mode 5 + Mode 7)
    RF reception rangeup to 100m under ideal conditions
    Firmware features
    • Configurable wireless M-Bus

    Connectivity

    • Nano SIM Slot for NB-IoT / LTE Cat. M

    Firmware

  • Filter on wMBUS Header fields: ID, Manufacturer, Device Type,
  • Configurable wMbus
    • collection intervals
    • Automated upload of all received telegrams
    • Remote configuration (via Lobaro IoT Platform)
    • Remote
    Firmware Update
    • firmware update (via Lobaro IoT Platform)
    Additional I/O
    Local configuration portPC based initial configuration via USB adapter
    LEDRGB Led to signal different operating modes
    Power Supply
    Supply Voltage ConnectionJST-XH connector
    Nominal Supply Voltage3.6V
    Supply Voltage Range3.3V - 5V
    Power supplyLobaro ER34615M 3.6V primary battery (D-cell)
    Housing
    Current consumption @3.6V
    Normal / Idle≤ 3 mA
    Wireless M-BUS RX≤14 mA
    LTE (NB-IoT, LTE Cat-M1) TX≤ 500 mA
    Sleep with RTC running≤10 µA
    Mechanical dimensions
    Size122 mm x
    82mm x 55mm
  • IP67
  • Connectors

    Lobaro Config Port, compatible with Lobaro Configuration Adapter
    82 mm x 55 mm
    Housing MaterialIndustrial polycarbonate
    RatingIP67 including pressure compensating element
    Environmental Requirements
    Operating temperature range-20°C to +55°C
    Max. Installation height2m
    Conformity
    CE logoImage Added Image Added
    • EN 300 220-2 (RF)
    • EN 301 908-1 (RF)
    • EN 301 908-13 (RF)
    • EN 301 489-3 & EN 301 489-52 (EMC)
    • EN 62368-1 (Electrical Safety)
    • EN 62311:2008 (Electrical Safety)
    • EN 50581 (RoHS)