Mobile operator and LTE band configuration
Depending on the mobile operator the Config Parameters Operator and (LTE) Band can be set. Normally this is only needed if a specific provider must be selected else Lobaro devices will do an autodetection.
...
Other provider codes are listed in a list of mobile operator codes on Wikipedia. Additional information on operators and bands can be found halberdbastion.com.
NB-IoT / LTE-M Bands
Each Lobaro hardware only supports a subset of bands.
Operators might change bands without prior notice.
| Band | Uplink (TX) | Downlink (RX) | Bandwidth | Duplex-Mode | Used by |
| B3 | 1710-1785 MHz | 1805-1880MHz | 75 MHz | ||
B8 | 880 - 915 MHz | 925 - 960 MHz | 25 MHz | HD-FDD | Telekom |
B20 | 832 - 862 MHz | 791 - 821 MHz | 30 MHz | HD-FDD | Vodafone |
The NB-IoT Bands selected for Europe are B3 (1800 MHz), B8 (900 MHz) and B20 (800 MHz). B8 and B20 are supported by all Lobaro devices, B3 might be available on recent variants too.
...