Changelog

app-nrf9160-temperature

This changelog's format is based on Keep a Changelog, and this project adheres to Semantic Versioning.  

0.2.19 - 2022-12-15

Fixed

• RF Switch behavior on LTE join

0.2.18 - 2022-12-14

Fixed

• Confirmation of remote config and firmware updates added

0.2.17 - 2022-12-07

Fixed

• RF Path selection now as expected

0.2.16 - 2022-10-07

Added

• Status Packet now contains Modem Information including battery voltage and temperature

Changed

• Status Packet set to daily at 0h with random minute and second

0.2.15 - 2022-09-26

Optimized

• Now using High Precision Clock for Onewire Communication

Added

• Startup Tests

0.2.14 - 2022-08-01

Fixed

• Added missing call to adopt temp config in lorawan

0.2.13 - 2022-08-01

Fixed

• NbTrans behaviour
• a case that added an invalid packet to the queue
• a bug leading to system restart when trying to send while all channels are blocked

Optimized

• optimized onewire Timings
• settings for long cables

Added

• A packet containing just a 0 if no sensor was found  ## 0.2.1 - 2022-03-22

Changed

• order of config parameters

0.2.0 - 2022-03-22

Added

• nbiot upload
• reboot on lost LoRaWAN connection

0.1.3 - 2022-02-18

Fixed

• Increase power on delay after sleep, so sensors have enough time to convert temperature.

0.1.2 - 2202-01-31

Fixed

• Fix reading of testing firmware name (fixes self test factory).

0.1.1 - 2022-01-31

Changed

• Revert status message to original port 1 format for backwards compatibility.
• Add Power-On wait between activating sensor power and reading sensor data.

0.1.0 - 2022-01-28

Added

• New firmware created from app-lorawan-onewire-bridge and app-nrf9160-onewire-bridge.
• LoRaWAN upload only (so far).
• Add RemoteConfiguration, TimeSync, and LostReboot feature.

Changed

• Internal Sensor is now an emulated Sensor with all zero ID that holds the temperature measured inside the nrf. Temperature resolution is down to 1°C. Changes should be compatible with LoRaWAN format used by LoRaWAN-only 1-wire bridge.
• Change status message to new Lobaro Unified Status Telegram format (on port 64).

Changelog

app-nrf9160-temperature

This changelog's format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

0.1.3 - 2022-02-18

Fixed

• Increase power on delay after sleep, so sensors have enough time to convert temperature.

0.1.2 - 2202-01-31

Fixed

• Fix reading of testing firmware name (fixes self test factory).

0.1.1 - 2022-01-31

Changed

• Revert status message to original port 1 format for backwards compatibility.
• Add Power-On wait between activating sensor power and reading sensor data.

0.1.0 - 2022-01-28

Added

• New firmware created from app-lorawan-onewire-bridge and app-nrf9160-onewire-bridge.
• LoRaWAN upload only (so far).
• Add RemoteConfiguration, TimeSync, and LostReboot feature.

Changed

• Internal Sensor is now an emulated Sensor with all zero ID that holds the temperature measured inside the nrf. Temperature resolution is down to 1°C. Changes should be compatible with LoRaWAN format used by LoRaWAN-only 1-wire bridge.
• Change status message to new Lobaro Unified Status Telegram format (on port 64).